Flooring Services · St. Louis, MO
Hardwood Floor
Refinishing in St. Louis.
Bring your existing floors back to life, without the cost or disruption of replacement. Dustless sanding, custom stains, and finish matched to your room.
Hardwood floor refinishing is one of the highest-return investments a homeowner can make. A professional sand-and-finish restores the original beauty of your floors, removing years of scratches, stains, and dullness, for a fraction of the cost of replacement.
Classic Flooring Solutions offers dustless refinishing throughout St. Louis. Our systems are designed for occupied homes, you can stay during the process and be back on your floors within 24 hours of the final coat. We sand, stain-match, and finish every floor in place.
- Dustless sanding systems, occupied homes welcome
- Custom stain mixing and on-site testing
- Water-based, oil-modified, and hard-wax oil finishes
- Matte through high-gloss sheen control
- Historic restoration, 1890–1940 St. Louis strip oak
- Screen & recoat for light refreshes
Dustless Sanding
Specialized dustless sanding systems remove scratches, stains, and old finish while keeping your home livable. Ideal for occupied houses, we've refinished floors with families in place.
Custom Stain Matching
Natural, Honey, Walnut, Jacobean, Ebony, Classic Gray or anything in between. We mix stains on-site and test directly on your floor before committing to the final color.
Finish Options
Water-based (low-VOC, fast dry), oil-modified (amber tone, deep penetration), and hard-wax oil (European matte, repairable in-place). Matte through high-gloss sheen control, room by room.
Historic Restoration
Weave-ins and patch repairs to original 1890–1940 strip oak common in St. Louis homes. We preserve what's worth preserving before recommending replacement.
Screen & Recoat
A lighter refresh option when the floor isn't deeply scratched, scuff-sand the existing finish and apply a fresh topcoat. Faster, less invasive, and significantly less expensive than full sanding.
Our Refinishing Process
Sanded, stained,
finished in place.
Every refinishing job is different. We assess the floor, discuss your goals, and recommend the right approach, whether that's a full sand-and-finish or a lighter screen and recoat.
COMMON QUESTIONS
Refinishing FAQs
How many times can hardwood floors be refinished?
Solid hardwood floors can typically be refinished 5–8 times over their lifetime, depending on plank thickness. A ¾” solid plank has substantial material above the tongue, enough for many refinishing cycles. Engineered hardwood can usually be refinished 1–3 times depending on the wear layer thickness. We’ll measure and advise during your free estimate.
Is your refinishing process truly dustless?
Substantially, yes. Our drum sanders connect to high-efficiency vacuum systems that capture 99%+ of the dust at the source. Some fine dust is inevitable in corners and edges where orbital sanders are used, but we contain it with plastic sheeting and clean thoroughly. Occupied homes are completely manageable.
How long does floor refinishing take, and when can I walk on the floors?
A standard sanding and refinishing job takes 2–3 days: one day for sanding, one day for stain (if applicable), and one or more coats of finish with dry time between. Water-based finishes dry faster, light foot traffic in 24 hours, furniture back in 48–72 hours. Oil-modified finishes need 48 hours before foot traffic and up to 7 days for full cure.
How do I know if I need refinishing or replacement?
Most floors can be refinished rather than replaced, which is significantly less expensive and disruptive. If the boards are deeply cupped, severely water-damaged (subfloor involved), or too thin to sand again, replacement may be necessary.
Can you match the sheen of my existing floors in other rooms?
Yes. Sheen matching is part of every refinishing project where blending matters. We’ll bring finish samples, test in-situ, and dial in the sheen before applying the full coat. We can also vary sheen room by room, many clients prefer matte in living areas and semi-gloss in kitchens.
ST. LOUIS, MO
Ready for new floors?
We come to you, measure the space, and deliver a detailed written quote within 24 hours.
No charge, no commitment.